Section 6.03
1. Intent. The I-1, Industrial District is intended to primarily accommodate wholesale activities, warehouses, and industrial operations whose external, physical effects are restricted to the area of the district and in no manner affect in a detrimental way any of the surrounding districts. The I-1 district is so structured as to permit, along with any specified uses, the manufacturing, compounding, processing, packaging, assembly, or treatment of finished or semi-finished products from previously prepared material. Since available industrial land in the Village is limited, this district is also intended to accommodate uses that are office- or research-type, along with “business center’ buildings that combine office and flexible industrial space. It is further intended that the processing of raw material for shipment of bulk form, to be used in an industrial operation at another location, not be permitted.
2. Area, Height, Bulk, and Placement Regulations
I-1 Lot Size Minimum Area 1 acre Minimum Width 150 ft. Minimum Depth 285 ft. Setbacks Front yard (min.) 50 ft. Side yard (min) Least One 20 ft. Rear yard (min.) 40 ft. Building Height Stories (max.) - Feet (max.) 35 ft. Building Area Maximum % Building Coverage 50%
Industrial Design Standards
Physical features and site relationships. All development in the district shall minimize its impact on the natural environment and adjacent properties. Site design shall preserve and incorporate any natural features unique to the site. Specifically:
4) Building design. The design of buildings shall neither impair nor interfere with the development or enjoyment of other properties in the area. Though site planning and design, projects proposed near dissimilar land uses shall carefully address potential negative impacts on existing uses. These impacts may include, but are not limited to, traffic, parking, circulation and safety issues, light and glare, noise, odors, dust control, and security concerns. 5) Distance between buildings. In a development in which there is more than one building, the distance between buildings shall be limited. Covered walks, arcades, landscaping and/or special paving shall be provided to connect buildings with each other and with the street. A variety in building size and massing shall be encouraged provided that architectural and spatial consistency can be maintained through the use of proportion, height, materials and design. 6) Applicability to entire site. Site plans must address the entire parcel whenever new development is proposed, be it an addition to an existing structure, development or redevelopment of a portion of a site, or development or redevelopment of the entire site. Site plans shall address the need for improvements throughout the site to assure that proposed construction will be in compliance with this article. 7) Streetscape and pedestrian orientation. Developments shall create a walkable, pedestrian scale. Site and building design shall address pedestrian needs and shall include creative approaches to improving pedestrian interest, access, and enjoyment: a) Spatial interruptions caused by parking or other non-pedestrian elements, such as building gaps, driveways, and service entries shall be avoided. Continuous pedestrian activity is strongly encouraged. b) Pedestrian spaces, such as covered walkways, courtyards and plazas shall be encouraged. The design shall encourage the development of open and attractive passageways between buildings and adjoining developments. c) Solid, blank walls and other “dead” or dull spaces at street level are to be avoided. Visually interesting building facades shall be maintained and/or established to engage pedestrian interest. Outdoor seating and dining areas are encouraged. d) Rear façades of both new and existing buildings must be designed to permit public access from parking lots whenever appropriate. e) Vehicular cross-access between properties shall be provided to minimize the number of curb cut openings onto public streets. Generally, vehicular access shall be limited, with no more than one access per street frontage.